Articles

• 
  Conference Paper

  Considerations for the accreditation of small punch creep testing

  A.J. Jones, M.R. Bache

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 26
• 
  Conference Paper

  Numerical Investigations of Small Punch Tests for Determining Tensile Properties

  M. Kamaya

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 27
• 
  Conference Paper

  Interim results of the reactor pressure vessel materials evaluation within the framework of the implemented Advanced Surveillance Specimen Programme

  10 Sep 2018

  1 ( S1 ) : 28
• 
  Conference Paper

  The development of a novel small ring specimen tensile testing technique

  10 Sep 2018

  1 ( S1 ) : 29
• 
  Conference Paper

  Miniature creep tests using plate specimens bonded by electron beam welding

  10 Sep 2018

  1 ( S1 ) : 30
• 
  Conference Paper

  SP creep properties of Gr.91 boiler pipings service-exposed in different USC power plants

  10 Sep 2018

  1 ( S1 ) : 31
• 
  Conference Paper

  Fatigue strength assessment of SUS316 by small bulge fatigue (SBF) test

  10 Sep 2018

  1 ( S1 ) : 32
• 
  Conference Paper

  Application of micro-tensile test for material characterization of mild steel DC01

  10 Sep 2018

  1 ( S1 ) : 33
• 
  Conference Paper

  Current status of the small punch test standardization within the ASTM

  R. Kopriva, M. Brumovsky, P. Petelova

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 34
• 
  Conference Paper

  Procedure of SPC data treatment for “uniaxial test correlation”

  Y.Z. Li, P. Stevens, P. Dymáček, F. Dobeš

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 35
• 
  Conference Paper

  Small punch technique used to evaluate the radiation damage in SS316L thin foils due to proton bombardment

  D. Moreno, S. Haroush, A. Turgeman, I. Silverman

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 36
• 
  Conference Paper

  Temperature measurement and calibration in small punch creep testing machines and equipment

  D. Omacht, Z. Kubanek, R. Dolezal, Z. Kubon, P. Cizek

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 37
• 
  Conference Paper

  Fatigue response evaluation of stainless steel SS 304 L(N) and SS 316 L(N) through cyclic ball indentation studies

  R.V. Prakash, K. Madhavan, A.R. Prakash, R. Sandhya, G.V.P. Reddy

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 38
• 
  Conference Paper

  Impression creep testing across a heat affected zone

  
  

  10 Sep 2018

  1 ( S1 ) : 39
• 
  Conference Paper

  Technical Note: Experimental techniques for Impression Creep and Small Punch testing

  10 Sep 2018

  1 ( S1 ) : 40
• 
  Conference Paper

  304L stainless steel fatigue evaluation using dynamic mechanical analysis

  10 Sep 2018

  1 ( S1 ) : 41
• 
  Conference Paper

  Investigations into Taylor-Quinney coefficient determination for a 7000 series aluminium alloy using a novel small specimen test technique

  10 Sep 2018

  1 ( S1 ) : 42
• 
  Conference Paper

  The role of punch eccentricity in small punch testing

  
  

  10 Sep 2018

  1 ( S1 ) : 43
• 
  Conference Paper

  SSTT2018 Swansea University Experimental investigations on the failure of a coating-substrate compound by means of the C-specimen concept and the small punch test

  10 Sep 2018

  1 ( S1 ) : 44
• 
  Conference Paper

  Neural network utilization for evaluation of the steel material properties

  J. Špička, L. Kander, P. Čížek

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 45
• 
  Conference Paper

  Comparative study between small punch test and hydraulic bulge test

  H. Wang, T. Xu, J. Zou

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 46
• 
  Conference Paper

  Application of the small punch test to evaluate the integrity of a cold spray titanium coating

  A. Wong, Y.L. Tan, M. Pilot, R.J. Lancaster, S.P. Jeffs, F. Li, A.W.Y. Tan, W. Sun, E. Liu, I. Mitchell

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 47
• 
  Conference Paper

  Determining the temperature dependent fracture toughness of carbon-bonded alumina using chevron-notched specimens

  H. Zielke, M. Abendroth, M. Kuna

  • PDF (EN)

  10 Sep 2018

  1 ( S1 ) : 48