Reading: The role of punch eccentricity in small punch testing

Download

A- A+
Alt. Display

Conference Paper

The role of punch eccentricity in small punch testing

Authors:

F. Šebek ,

Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic
X close

P. Dymáček,

CEITEC IPM, Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Žižkova 22, 616 62 Brno, Czech Republic
X close

P. Kubík,

Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic
X close

J. Hůlka,

Institute of Applied Mechanics, Resslova 972/3, 602 00 Brno, Czech Republic
X close

J. Petruška

Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic
X close

Abstract

The small punch testing technique under quasi-static loading was examined in the view of punch eccentricity role. It might arise especially when the ball is used as the penetrating tool, instead of hemispherical-ended punch. The austenitic stainless steel AISI 316L was chosen to execute several various “large scale” tests in order to calibrate the multi-linear stress–strain relationship along with the ductile fracture criterion KHPS. All the calibration procedure was performed without using the small punch testing. Then, the model was applied to small punch tests to observe the prediction ability when compared to real small punch experiments. Consequently, a numerical study was conducted to see the role of eccentricity in the case of 2 and 2.5 mm ball diameters used as the penetrating tool. The magnitude of eccentricity up to 0.3 mm was numerically tested. The results showed negligible role of eccentricity for 2 mm ball diameter and minor role for 2.5 mm diameter and studied material.
How to Cite: Šebek, F., Dymáček, P., Kubík, P., Hůlka, J. and Petruška, J., 2018. The role of punch eccentricity in small punch testing. Ubiquity Proceedings, 1(S1), p.43. DOI: http://doi.org/10.5334/uproc.43
11
Views
6
Downloads
Published on 10 Sep 2018.
Peer Reviewed

Downloads

  • PDF (EN)

    comments powered by Disqus